Electrical All installed to BS 7671

Calibrated Multifunction tester

18th edition (2382) City & Guilds, 2394 + 2395 level 3 testing and inspection

all work will be issued a minors work certification. I am not presently covering Part P scheme due to commercial commitments (not required)

Electrical testing with a calibrated multifunction tester is essential to verify that all electrical work has been installed safely and complies with current regulations. A calibrated tester provides accurate, reliable measurements, confirming that protective devices, earthing, insulation, and circuit continuity are functioning correctly. This helps ensure the installation is safe for use, reduces the risk of electric shock or fire, and provides confidence that the work meets the required standards.

Test and inspect identify faulty circuits, replace damaged cables , circuit breakers. cables like for like,

Security light

A security light with a PIR (Passive Infrared) detector helps improve safety and security by automatically illuminating an area when movement is detected. It deters potential intruders, increases visibility for occupants and visitors, and reduces the risk of accidents in poorly lit areas.”

Installed with a switch fused spur internally for isolation when required, a junction box will be sited externally for connection between the security light and the cable from internal switch fused spur.

External weatherproof mains supply

An external twin socket provides a safe and convenient outdoor power supply for equipment such as lawnmowers, pressure washers, garden tools, and outdoor lighting. A weatherproof socket reduces the need for extension leads, improving both safety and practicality when using electrical equipment outside.

Electrical Accessories

Replace, Relocate

Electrical Accessories

Replace Relocate

Commercial panel light

Energy Efficient – Uses significantly less electricity than traditional fluorescent ceiling lights, reducing energy costs.
Uniform Light Distribution – Delivers even, glare-free lighting across the workspace, improving comfort and visibility.
Long Lifespan – LED technology typically lasts much longer than fluorescent tubes, reducing maintenance and replacement costs.
Low Maintenance – Fewer lamp changes and lower failure rates help minimize disruption in commercial environments.
Slim and Modern Design – Creates a clean, professional ceiling appearance.
Instant Start – Reaches full brightness immediately with no flickering or warm-up time.
Environmentally Friendly – Contains no mercury and consumes less energy, helping reduce carbon emissions.
Flexible Options – Available in different wattages, colour temperatures, and dimmable versions to suit various applications

RJ45 connection, Hard wired connectoions from patch panel to RJ45 module and tested wit Tek Ct Qualification tester

Data CAt 6-6a Signal Tek Ct Qualification Tester

Qualification tester (SignalTEK CT): Verifies that installed cabling can support specific Ethernet speeds (e.g. 10/100/1000 Mbps and multi-gigabit, depending on the model). It identifies wiring faults, measures network performance, and confirms the cable is suitable for network applications

Real-World Testing: Unlike basic wiremap testers, it transmits actual Ethernet data frames to check for transmission errors, measuring 1Gb speeds without dropping a single bit.
Advanced Diagnostics: Uses Time Domain Reflectometry (TDR) to accurately locate wiring faults such as opens, shorts, crossed pairs, and split pairs.
Automated Reporting: Generates instant pass/fail PDF or CSV test reports, proving to clients that the installation was done correctly.

Page updated

Google Sites

Report abuse